|
Home > Products
Material Safety Data Sheet
Dillweed Oil
Sun West Ingredients
for information or emergencies, call (509) 874-2002
Product Identification
Product Name: DILLWEED OIL
Hazardous Ingredient(s): None Known
Physical/Chemical Characteristics
Boiling Point: N/A deg C
Melting Point: N/A deg C
Specific Gravity (water=1): > .9
Solubility: 1% in water |
Vapor Pressure: N/A mm@ 20 deg C
Vapor Density (air=1): >1
Percent Volatile @ 70 deg F: N/A
Evap. Rate (butyl acetate=1): N/A |
Appearance and odor: Light yellow or yellow liquid having the characteristic
odor and taste of dill weed (FCC).
Fire and Explosion Hazards
Flash Point: > 145 deg F (TCC)
Flammable Limits: N/A
Extinguishing Media: Carbon Dioxide, dry chemical or foam
Unusual Fire and Explosive Hazards: None Known
Reactivity Data
This product presents no significant reactivity hazard.
Health Hazard Data
Routes of Entry: Inhalation and skin contact
Health Hazards: Irritation of eyes and lining of nose and throat if contacted
with material. This product is a "mixture" for which no health
hazard data is available.
Signs and Symptoms of Exposure: Red watery eyes, runny nose, raw throat,
and slight burning sensation on other contacted areas.
Medical Conditions Aggravated by Exposure: None Known
Emergency First Aid Procedures: Remove contaminated clothing if necessary,
then flush contaminated area with large quantities of water. If irritation
persists, contact a physician immediately.
Precautions for Safe Handling and Use
Steps to be taken if Material is Released or Spilled: Eliminate all ignition
sources. Ventilate area. Contain spill and recover all free product.
Waste Disposal Method: Place material and absorbent into sealed containers
and dispose of in accordance with the current applicable laws and regulations.
Handling and Storage Precautions: Store in a cool, dry, ventilated area
away from heat sources. Keep containers tightly closed and up right when
not in use.
Other Precautions: None known
Control Measures
Respiratory Protection: None generally required
Ventilation: Local exhaust meeting ACGIH criteria as needed to control
vapor.
Protective Gloves: Use chemical resistant gloves as needed to avoid prolonged
or repeated contact.
Eye Protection: Use goggles or face shield when eye contact may occur.
Work/Hygienic Practices: Avoid inhalation and contact with skin and eyes.
Wash hands after handling the product.
Download this Material
Safety Data Sheet [
PDF 69 KB]
Return to Products
|